
Vaporesso Vibe Pod Vape Kit
Vaporesso Vibe Pod Kit
Vaporesso Vibe is a pod kit with two power modes, a dual mesh coil and an 1100mAh battery that lasts all day on MTL. ECO mode runs at 14W for a gentle draw and extends pod life by up to 200%. PWR mode pushes 24W for thicker vapour and a stronger throat hit. A physical switch on the side toggles between modes with no menus to navigate. Auto draw fires the coil on inhale and a 0.54 inch OLED screen shows battery level, puff count and active wattage. One Vibe Dual Smart pod comes pre-installed with top fill and 2ml TPD capacity. Eight colours from Cherry Pink to Berry Purple.
Key Features
- 1100mAh battery with USB-C charging for all day MTL vaping
- ECO mode at 14W for a gentle draw and up to 200% longer pod life
- PWR mode at 24W for denser vapour and stronger throat hit
- Auto draw activation with no fire button
- 0.54 inch OLED screen showing battery, puff count and wattage
- Dual mesh coil pod with top fill and 2ml TPD capacity
- Pod options at 0.6/0.8 ohm and 0.7/1.0 ohm
- 8 colours including Cherry Pink, Sky Blue and Berry Purple

Battery and Charging
1100mAh sits at the higher end for a pod kit. MTL vapers running ECO mode will get a full day from one charge. PWR mode drains faster but still covers most of a working day.
USB-C charging gets the battery from flat to full in around 45 minutes. The OLED screen shows exact battery percentage so there is no guessing when to plug in.
ECO and PWR Modes
A switch on the side of the Vaporesso Vibe toggles between ECO (14W) and PWR (24W). ECO fires at lower wattage for a cooler draw and longer pod life. PWR pushes more power through the dual mesh coil for 50% denser vapour.
No menus or button sequences. Slide the switch and the OLED screen confirms the active mode instantly.

Dual Mesh Coil Pod
Each Vibe Dual Smart pod uses a built in dual mesh coil. Two mesh strips heat e-liquid across a wider surface than single coil pods. More contact means fuller flavour and consistent vapour from the first draw to the last.
Top fill cap slides back for quick refills. 2ml TPD capacity. Nic salt e-liquids between 10mg and 20mg work well at both wattages. Read more about troubleshooting common Vaporesso issues if a pod needs replacing sooner than expected.

Vibe Pod Options
|
Pod |
Resistance |
Draw |
|
0.6/0.8 ohm Dual Mesh |
0.6 + 0.8 ohm |
MTL, smooth flavour |
|
0.7/1.0 ohm Dual Mesh |
0.7 + 1.0 ohm |
MTL, tighter draw |

Vibe Colours
Eight colours are available across the Vibe range.
- Cherry Pink
- Sky Blue
- Fresh Green
- Racing Red
- Silver
- Berry Purple
Specifications
|
Spec |
Detail |
|
Battery |
1100mAh built in |
|
Charging |
USB-C |
|
Power Modes |
ECO (14W) and PWR (24W) |
|
Activation |
Auto draw (inhale) |
|
Screen |
0.54 inch OLED |
|
Pod Included |
Vibe Dual Smart (dual mesh) |
|
Pod Capacity |
2ml TPD |
|
Pod Options |
0.6/0.8 ohm, 0.7/1.0 ohm |
|
Fill Type |
Top fill |
|
Vaping Style |
MTL |
|
Colours |
8 |
Vaporesso Vibe vs Vibe SE
|
Feature |
Vibe |
Vibe SE |
|
Power Modes |
ECO (14W) + PWR (24W) |
Fixed output |
|
Screen |
0.54 inch OLED |
None |
|
Activation |
Auto draw |
Auto draw |
|
Pod |
Vibe Dual Smart |
Vibe Dual Smart |
Vaporesso Vibe adds an OLED screen and two power modes over the Vibe SE. Both kits share the same Vibe Dual Smart pod and auto draw activation. The SE drops the screen and power switch for a simpler build. Vapers who want to toggle between a gentle and stronger hit will get more from the Vaporesso Vibe. Browse the full Vaporesso range for more kits and pods.

What's in the Box?
- 1x Vaporesso Vibe Kit
- 1x Vibe Dual Smart Pod (pre-installed)
- 1x USB-C Charging Cable
- 1x User Manual
Original: $7.94
-65%$7.94
$2.78More Images








Vaporesso Vibe Pod Vape Kit
Vaporesso Vibe Pod Kit
Vaporesso Vibe is a pod kit with two power modes, a dual mesh coil and an 1100mAh battery that lasts all day on MTL. ECO mode runs at 14W for a gentle draw and extends pod life by up to 200%. PWR mode pushes 24W for thicker vapour and a stronger throat hit. A physical switch on the side toggles between modes with no menus to navigate. Auto draw fires the coil on inhale and a 0.54 inch OLED screen shows battery level, puff count and active wattage. One Vibe Dual Smart pod comes pre-installed with top fill and 2ml TPD capacity. Eight colours from Cherry Pink to Berry Purple.
Key Features
- 1100mAh battery with USB-C charging for all day MTL vaping
- ECO mode at 14W for a gentle draw and up to 200% longer pod life
- PWR mode at 24W for denser vapour and stronger throat hit
- Auto draw activation with no fire button
- 0.54 inch OLED screen showing battery, puff count and wattage
- Dual mesh coil pod with top fill and 2ml TPD capacity
- Pod options at 0.6/0.8 ohm and 0.7/1.0 ohm
- 8 colours including Cherry Pink, Sky Blue and Berry Purple

Battery and Charging
1100mAh sits at the higher end for a pod kit. MTL vapers running ECO mode will get a full day from one charge. PWR mode drains faster but still covers most of a working day.
USB-C charging gets the battery from flat to full in around 45 minutes. The OLED screen shows exact battery percentage so there is no guessing when to plug in.
ECO and PWR Modes
A switch on the side of the Vaporesso Vibe toggles between ECO (14W) and PWR (24W). ECO fires at lower wattage for a cooler draw and longer pod life. PWR pushes more power through the dual mesh coil for 50% denser vapour.
No menus or button sequences. Slide the switch and the OLED screen confirms the active mode instantly.

Dual Mesh Coil Pod
Each Vibe Dual Smart pod uses a built in dual mesh coil. Two mesh strips heat e-liquid across a wider surface than single coil pods. More contact means fuller flavour and consistent vapour from the first draw to the last.
Top fill cap slides back for quick refills. 2ml TPD capacity. Nic salt e-liquids between 10mg and 20mg work well at both wattages. Read more about troubleshooting common Vaporesso issues if a pod needs replacing sooner than expected.

Vibe Pod Options
|
Pod |
Resistance |
Draw |
|
0.6/0.8 ohm Dual Mesh |
0.6 + 0.8 ohm |
MTL, smooth flavour |
|
0.7/1.0 ohm Dual Mesh |
0.7 + 1.0 ohm |
MTL, tighter draw |

Vibe Colours
Eight colours are available across the Vibe range.
- Cherry Pink
- Sky Blue
- Fresh Green
- Racing Red
- Silver
- Berry Purple
Specifications
|
Spec |
Detail |
|
Battery |
1100mAh built in |
|
Charging |
USB-C |
|
Power Modes |
ECO (14W) and PWR (24W) |
|
Activation |
Auto draw (inhale) |
|
Screen |
0.54 inch OLED |
|
Pod Included |
Vibe Dual Smart (dual mesh) |
|
Pod Capacity |
2ml TPD |
|
Pod Options |
0.6/0.8 ohm, 0.7/1.0 ohm |
|
Fill Type |
Top fill |
|
Vaping Style |
MTL |
|
Colours |
8 |
Vaporesso Vibe vs Vibe SE
|
Feature |
Vibe |
Vibe SE |
|
Power Modes |
ECO (14W) + PWR (24W) |
Fixed output |
|
Screen |
0.54 inch OLED |
None |
|
Activation |
Auto draw |
Auto draw |
|
Pod |
Vibe Dual Smart |
Vibe Dual Smart |
Vaporesso Vibe adds an OLED screen and two power modes over the Vibe SE. Both kits share the same Vibe Dual Smart pod and auto draw activation. The SE drops the screen and power switch for a simpler build. Vapers who want to toggle between a gentle and stronger hit will get more from the Vaporesso Vibe. Browse the full Vaporesso range for more kits and pods.

What's in the Box?
- 1x Vaporesso Vibe Kit
- 1x Vibe Dual Smart Pod (pre-installed)
- 1x USB-C Charging Cable
- 1x User Manual
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Vaporesso Vibe Pod Kit
Vaporesso Vibe is a pod kit with two power modes, a dual mesh coil and an 1100mAh battery that lasts all day on MTL. ECO mode runs at 14W for a gentle draw and extends pod life by up to 200%. PWR mode pushes 24W for thicker vapour and a stronger throat hit. A physical switch on the side toggles between modes with no menus to navigate. Auto draw fires the coil on inhale and a 0.54 inch OLED screen shows battery level, puff count and active wattage. One Vibe Dual Smart pod comes pre-installed with top fill and 2ml TPD capacity. Eight colours from Cherry Pink to Berry Purple.
Key Features
- 1100mAh battery with USB-C charging for all day MTL vaping
- ECO mode at 14W for a gentle draw and up to 200% longer pod life
- PWR mode at 24W for denser vapour and stronger throat hit
- Auto draw activation with no fire button
- 0.54 inch OLED screen showing battery, puff count and wattage
- Dual mesh coil pod with top fill and 2ml TPD capacity
- Pod options at 0.6/0.8 ohm and 0.7/1.0 ohm
- 8 colours including Cherry Pink, Sky Blue and Berry Purple

Battery and Charging
1100mAh sits at the higher end for a pod kit. MTL vapers running ECO mode will get a full day from one charge. PWR mode drains faster but still covers most of a working day.
USB-C charging gets the battery from flat to full in around 45 minutes. The OLED screen shows exact battery percentage so there is no guessing when to plug in.
ECO and PWR Modes
A switch on the side of the Vaporesso Vibe toggles between ECO (14W) and PWR (24W). ECO fires at lower wattage for a cooler draw and longer pod life. PWR pushes more power through the dual mesh coil for 50% denser vapour.
No menus or button sequences. Slide the switch and the OLED screen confirms the active mode instantly.

Dual Mesh Coil Pod
Each Vibe Dual Smart pod uses a built in dual mesh coil. Two mesh strips heat e-liquid across a wider surface than single coil pods. More contact means fuller flavour and consistent vapour from the first draw to the last.
Top fill cap slides back for quick refills. 2ml TPD capacity. Nic salt e-liquids between 10mg and 20mg work well at both wattages. Read more about troubleshooting common Vaporesso issues if a pod needs replacing sooner than expected.

Vibe Pod Options
|
Pod |
Resistance |
Draw |
|
0.6/0.8 ohm Dual Mesh |
0.6 + 0.8 ohm |
MTL, smooth flavour |
|
0.7/1.0 ohm Dual Mesh |
0.7 + 1.0 ohm |
MTL, tighter draw |

Vibe Colours
Eight colours are available across the Vibe range.
- Cherry Pink
- Sky Blue
- Fresh Green
- Racing Red
- Silver
- Berry Purple
Specifications
|
Spec |
Detail |
|
Battery |
1100mAh built in |
|
Charging |
USB-C |
|
Power Modes |
ECO (14W) and PWR (24W) |
|
Activation |
Auto draw (inhale) |
|
Screen |
0.54 inch OLED |
|
Pod Included |
Vibe Dual Smart (dual mesh) |
|
Pod Capacity |
2ml TPD |
|
Pod Options |
0.6/0.8 ohm, 0.7/1.0 ohm |
|
Fill Type |
Top fill |
|
Vaping Style |
MTL |
|
Colours |
8 |
Vaporesso Vibe vs Vibe SE
|
Feature |
Vibe |
Vibe SE |
|
Power Modes |
ECO (14W) + PWR (24W) |
Fixed output |
|
Screen |
0.54 inch OLED |
None |
|
Activation |
Auto draw |
Auto draw |
|
Pod |
Vibe Dual Smart |
Vibe Dual Smart |
Vaporesso Vibe adds an OLED screen and two power modes over the Vibe SE. Both kits share the same Vibe Dual Smart pod and auto draw activation. The SE drops the screen and power switch for a simpler build. Vapers who want to toggle between a gentle and stronger hit will get more from the Vaporesso Vibe. Browse the full Vaporesso range for more kits and pods.

What's in the Box?
- 1x Vaporesso Vibe Kit
- 1x Vibe Dual Smart Pod (pre-installed)
- 1x USB-C Charging Cable
- 1x User Manual





















