
Vaporesso XROS COREX 3.0 Replacement Pods
Vaporesso XROS COREX 3.0 Pods
Vaporesso XROS COREX 3.0 pods come with morph-mesh coils and cumulus cotton wicking for stronger flavour and longer pod life than the COREX 2.0. Five resistances from 0.4ohm up to 1.2ohm cover both MTL and RDL vaping. Each Vaporesso XROS pod holds 2ml, fills from the top without removing the pod, and comes in packs of four.
Also known as Vaporesso XROS 3 pods, these COREX 3.0 replacement pods fit every kit in the XROS series. Fill the MTL pods with nic salt e-liquids or use 50/50 e-liquids on the lower resistance RDL options.
Key Features
- Morph-mesh coils with thicker edges and thinner centre for even heating
- Cumulus cotton wicking absorbs more juice and stays saturated longer
- Top-fill design, pull the mouthpiece off and refill without removing the pod
- Five resistances: 0.4ohm, 0.6ohm, 0.8ohm, 1.0ohm, 1.2ohm
- MTL and RDL options, tight draw on 0.8ohm and above or looser on 0.4ohm and 0.6ohm
- 2ml capacity, TPD compliant
- Packs of four pods per box
Morph-Mesh Coils and Cumulus Cotton
Vaporesso changed the mesh layout on the COREX 3.0 pods. The coil is thicker around the outside and thinner through the centre, spreading heat more evenly across the whole surface. Side by side with the COREX 2.0 pods the difference is noticeable, particularly on fruit and menthol flavours.
Cumulus cotton soaks up more juice than the wicking in earlier Vaporesso XROS pods. The wick stays saturated for longer, so that dry papery taste takes longer to appear. SSS leak protection keeps your kit from getting sticky.
Resistance Options
Each XROS replacement pod has a built-in coil, so there is nothing to swap out. Pick the resistance you want when you order.
Pod |
Style |
Wattage |
Best E-Liquid |
0.4ohm |
RDL |
25W |
50/50 or 70/30 |
0.6ohm |
RDL |
21W |
50/50 |
0.8ohm |
MTL |
16W |
Nic salts or 50/50 |
1.0ohm |
MTL |
12W |
Nic salts |
1.2ohm |
MTL |
10W |
Nic salts |
The 0.8ohm is the most popular XROS pod for nic salt vapers. For more vapour with a looser draw, try the 0.6ohm with a 50/50 juice. Our nic salt strengths guide covers the difference between 5mg, 10mg, and 20mg if you are not sure which to go with.
XROS Kit Compatibility
Vaporesso XROS pods use the same connection across the whole range, so COREX 3.0 pods click into any of the kits below.
- XROS 5
- XROS 5 Mini
- XROS 4
- XROS 4 Mini
- XROS 4 Nano
- XROS Pro 2
- XROS 3
- XROS 3 Mini
- XROS 3 Nano
- XROS 2
- XROS Mini
- XROS Pro
- XROS
Check our Vaporesso pods page for all available resistances and pack sizes.
What's in the Box?
- 4x Vaporesso XROS COREX 3.0 Pods (2ml)
Original: $11.34
-65%$11.34
$3.97More Images




Vaporesso XROS COREX 3.0 Replacement Pods
Vaporesso XROS COREX 3.0 Pods
Vaporesso XROS COREX 3.0 pods come with morph-mesh coils and cumulus cotton wicking for stronger flavour and longer pod life than the COREX 2.0. Five resistances from 0.4ohm up to 1.2ohm cover both MTL and RDL vaping. Each Vaporesso XROS pod holds 2ml, fills from the top without removing the pod, and comes in packs of four.
Also known as Vaporesso XROS 3 pods, these COREX 3.0 replacement pods fit every kit in the XROS series. Fill the MTL pods with nic salt e-liquids or use 50/50 e-liquids on the lower resistance RDL options.
Key Features
- Morph-mesh coils with thicker edges and thinner centre for even heating
- Cumulus cotton wicking absorbs more juice and stays saturated longer
- Top-fill design, pull the mouthpiece off and refill without removing the pod
- Five resistances: 0.4ohm, 0.6ohm, 0.8ohm, 1.0ohm, 1.2ohm
- MTL and RDL options, tight draw on 0.8ohm and above or looser on 0.4ohm and 0.6ohm
- 2ml capacity, TPD compliant
- Packs of four pods per box
Morph-Mesh Coils and Cumulus Cotton
Vaporesso changed the mesh layout on the COREX 3.0 pods. The coil is thicker around the outside and thinner through the centre, spreading heat more evenly across the whole surface. Side by side with the COREX 2.0 pods the difference is noticeable, particularly on fruit and menthol flavours.
Cumulus cotton soaks up more juice than the wicking in earlier Vaporesso XROS pods. The wick stays saturated for longer, so that dry papery taste takes longer to appear. SSS leak protection keeps your kit from getting sticky.
Resistance Options
Each XROS replacement pod has a built-in coil, so there is nothing to swap out. Pick the resistance you want when you order.
Pod |
Style |
Wattage |
Best E-Liquid |
0.4ohm |
RDL |
25W |
50/50 or 70/30 |
0.6ohm |
RDL |
21W |
50/50 |
0.8ohm |
MTL |
16W |
Nic salts or 50/50 |
1.0ohm |
MTL |
12W |
Nic salts |
1.2ohm |
MTL |
10W |
Nic salts |
The 0.8ohm is the most popular XROS pod for nic salt vapers. For more vapour with a looser draw, try the 0.6ohm with a 50/50 juice. Our nic salt strengths guide covers the difference between 5mg, 10mg, and 20mg if you are not sure which to go with.
XROS Kit Compatibility
Vaporesso XROS pods use the same connection across the whole range, so COREX 3.0 pods click into any of the kits below.
- XROS 5
- XROS 5 Mini
- XROS 4
- XROS 4 Mini
- XROS 4 Nano
- XROS Pro 2
- XROS 3
- XROS 3 Mini
- XROS 3 Nano
- XROS 2
- XROS Mini
- XROS Pro
- XROS
Check our Vaporesso pods page for all available resistances and pack sizes.
What's in the Box?
- 4x Vaporesso XROS COREX 3.0 Pods (2ml)
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Vaporesso XROS COREX 3.0 Pods
Vaporesso XROS COREX 3.0 pods come with morph-mesh coils and cumulus cotton wicking for stronger flavour and longer pod life than the COREX 2.0. Five resistances from 0.4ohm up to 1.2ohm cover both MTL and RDL vaping. Each Vaporesso XROS pod holds 2ml, fills from the top without removing the pod, and comes in packs of four.
Also known as Vaporesso XROS 3 pods, these COREX 3.0 replacement pods fit every kit in the XROS series. Fill the MTL pods with nic salt e-liquids or use 50/50 e-liquids on the lower resistance RDL options.
Key Features
- Morph-mesh coils with thicker edges and thinner centre for even heating
- Cumulus cotton wicking absorbs more juice and stays saturated longer
- Top-fill design, pull the mouthpiece off and refill without removing the pod
- Five resistances: 0.4ohm, 0.6ohm, 0.8ohm, 1.0ohm, 1.2ohm
- MTL and RDL options, tight draw on 0.8ohm and above or looser on 0.4ohm and 0.6ohm
- 2ml capacity, TPD compliant
- Packs of four pods per box
Morph-Mesh Coils and Cumulus Cotton
Vaporesso changed the mesh layout on the COREX 3.0 pods. The coil is thicker around the outside and thinner through the centre, spreading heat more evenly across the whole surface. Side by side with the COREX 2.0 pods the difference is noticeable, particularly on fruit and menthol flavours.
Cumulus cotton soaks up more juice than the wicking in earlier Vaporesso XROS pods. The wick stays saturated for longer, so that dry papery taste takes longer to appear. SSS leak protection keeps your kit from getting sticky.
Resistance Options
Each XROS replacement pod has a built-in coil, so there is nothing to swap out. Pick the resistance you want when you order.
Pod |
Style |
Wattage |
Best E-Liquid |
0.4ohm |
RDL |
25W |
50/50 or 70/30 |
0.6ohm |
RDL |
21W |
50/50 |
0.8ohm |
MTL |
16W |
Nic salts or 50/50 |
1.0ohm |
MTL |
12W |
Nic salts |
1.2ohm |
MTL |
10W |
Nic salts |
The 0.8ohm is the most popular XROS pod for nic salt vapers. For more vapour with a looser draw, try the 0.6ohm with a 50/50 juice. Our nic salt strengths guide covers the difference between 5mg, 10mg, and 20mg if you are not sure which to go with.
XROS Kit Compatibility
Vaporesso XROS pods use the same connection across the whole range, so COREX 3.0 pods click into any of the kits below.
- XROS 5
- XROS 5 Mini
- XROS 4
- XROS 4 Mini
- XROS 4 Nano
- XROS Pro 2
- XROS 3
- XROS 3 Mini
- XROS 3 Nano
- XROS 2
- XROS Mini
- XROS Pro
- XROS
Check our Vaporesso pods page for all available resistances and pack sizes.
What's in the Box?
- 4x Vaporesso XROS COREX 3.0 Pods (2ml)





















